Product Details
Product Introduction:
A cassette fan coil unit is an air-conditioning terminal device installed within the ceiling of a room, with only the decorative supply‑air grille visible on the ceiling surface. It typically features four‑way or three‑way airflow, with centralized return air at the center; the air is delivered in a radiant pattern that closely follows the ceiling, ensuring uniform indoor temperature distribution with no dead zones. This type of unit is widely used in settings where aesthetic appeal and comfort are paramount, such as hotel lobbies, office spaces, brand‑name retail stores, private dining rooms, and high‑end residences. The unit comes equipped with a built‑in condensate lift pump, allowing flexible adaptation to various drainage conditions, and can be conveniently operated via wireless remote control or an LCD wired controller.
Main functions of the Products:
1. Efficient Cooling and Heating: It connects to the central air-conditioning chilled and hot water system, delivering cool air in summer and warm air in winter, and works with a temperature control system to achieve precise indoor temperature regulation.
2. Four-sided air supply: Air is discharged from the louvers around the panel in a direction that aligns with the suspended ceiling, minimizing direct drafts on occupants. Cool air naturally descends due to density differences, while warm air is directed downward by guide vanes, resulting in a minimal temperature gradient throughout the room and exceptional comfort.
3. Independent zone and time-based control: Each unit can independently control start-up and shutdown, temperature settings, fan speed adjustment, and timed on/off operation, enabling on-demand use and efficient operation.
4. Indoor air purification circulation: The return air grille is equipped with a washable dust filter that continuously filters indoor air, keeping the unit in the ceiling clean and ensuring fresh indoor air.
5. Low-noise operation: The fan and motor are housed within a built-in sound‑attenuation enclosure, installed in the suspended ceiling and further shielded by a panel, resulting in extremely low noise levels that do not interfere with work or rest.
6. Automatic condensate drainage: The unit comes standard with a high-head condensate lift pump, enabling condensate to be pumped and discharged without relying on gravity‑driven slopes within the ceiling, thus offering greater flexibility in installation.
7. Aesthetic integration into the ceiling: The panel color is typically off-white, with a minimalist design that is compatible with most ceiling tile sizes, exposing only the panel for a clean, uncluttered look.
Product model specifications:
| Type Number |
FP-34KM |
FP-51KM |
FP-68KM |
FP-85KM |
FP-102KM |
FP-136KM |
FP-170KM |
FP-204KM |
FP-238KM |
||
| Rated cooling capacity |
H |
W |
1980 |
2980 |
3680 |
4980 |
5580 |
7080 |
9900 |
10400 |
11800 |
| M |
1631 |
2279 |
2814 |
3750 |
4322 |
5534 |
7512 |
8088 |
9681 |
||
| L |
1048 |
1519 |
1894 |
2519 |
2854 |
5534 |
5008 |
5554 |
6454 |
||
| Rated calorific value |
H |
W |
2980 |
4800 |
5480 |
7200 |
8180 |
10600 |
14500 |
15200 |
18000 |
| M |
2454 |
3671 |
4191 |
5421 |
6335 |
8179 |
11005 |
12353 |
14521 |
||
| L |
1578 |
2447 |
2821 |
3600 |
4170 |
5479 |
7335 |
8482 |
9681 |
||
| Input power |
W |
34 |
50 |
58 |
72 |
92 |
126 |
128 |
152 |
198 |
|
| Operating current |
A |
0.151 |
0.225 |
0.258 |
0.32 |
0.385 |
0.561 |
0.547 |
0.677 |
0.882 |
|
| Power supply |
V/P/Hz |
220V-240V/1/50Hz |
|||||||||
| Number of fans |
1 |
||||||||||
| Rated airflow |
H |
m³/h |
340 |
510 |
680 |
850 |
1020 |
1360 |
1700 |
2040 |
2380 |
| M |
280 |
390 |
520 |
640 |
790 |
1030 |
1290 |
1500 |
1800 |
||
| L |
180 |
260 |
350 |
430 |
520 |
690 |
860 |
1030 |
1200 |
||
| Noise |
dB(A) |
34/36/37 |
35/37/39 |
37/39/41 |
39/40/43 |
40/43/45 |
41/44/46 |
41/45/47 |
43/46/49 |
44/48/52 |
|
| Control method |
Remote control or wired control |
||||||||||
| Water flow rate |
m³/h |
0.42 |
0.52 |
0.62 |
0.86 |
0.98 |
1.08 |
1.58 |
1.78 |
1.92 |
|
| Water resistance |
KPa |
14 |
14 |
16 |
18 |
22 |
25 |
39 |
44 |
46 |
|
| Drain pipe size |
mm |
φ26 |
|||||||||
| Connection method |
External thread connection |
||||||||||
| Weight |
kilogram |
21 |
22 |
23 |
30.5 |
31 |
31.5 |
38.5 |
39.5 |
40.5 |
|
| Panel |
L |
mm |
650 |
650 |
650 |
800 |
800 |
800 |
950 |
950 |
950 |
| P |
650 |
650 |
650 |
800 |
800 |
800 |
950 |
950 |
950 |
||
| H |
30 |
30 |
30 |
30 |
30 |
30 |
30 |
30 |
30 |
||
| Weight |
kilogram |
2 |
2 |
2 |
3.5 |
3.5 |
3.5 |
4.5 |
4.5 |
4.5 |
|
Keywords:
Quote Inquiry
Please fill in your Contact information and your requirements; we will arrange for a professional to contact you!
Cross-flow air curtain machine
The cross‑flow air curtain employs a large‑diameter, slender cross‑flow impeller—also known as a tangential fan—directly driven by a single‑phase motor to generate a wide, planar, high‑velocity airflow. It is installed above or on the side of doorways. The unit features a flat, rectangular profile with a much reduced depth compared to centrifugal models, allowing it to seamlessly integrate into various ceiling designs. It is particularly well suited for spaces with limited headroom and where aesthetics and quiet operation are paramount, such as shopping malls, supermarkets, restaurants, office buildings, banks, hospitals, and residential garages.
Our company’s surface-type coolers are among the core heat-exchange devices in air-conditioning and ventilation systems. They are primarily used to cool and dehumidify air, and can also be switched to hot-water or steam mode during winter to provide air heating. By utilizing a refrigerant (such as chilled water, refrigerant, or brine) or a heat-transfer medium (such as hot water or steam) flowing inside the tubes, these units facilitate forced‑convection heat exchange with the air flowing outside the tubes, thereby regulating air temperature and humidity. As the central heat-exchange components of chiller units, fresh-air handling units, fan coil units, and other equipment, they offer high heat-exchange efficiency, flexible installation, and broad compatibility.
The ceiling‑mounted fresh air ventilator (ceiling‑type air handling unit) is a central air‑conditioning terminal unit that integrates fresh air exchange, air temperature and humidity control, air filtration and purification, and energy recovery. The unit features a concealed ceiling‑mount installation, suspended within the building’s suspended ceiling. It utilizes chilled water or hot water piping to provide cooling and heating, while simultaneously exhausting indoor stale air and supplying filtered outdoor fresh air. This system not only enhances indoor air quality in enclosed spaces but also regulates air temperature through heat‑exchanger coils, offering both ventilation and central air‑conditioning functions. It delivers energy savings, minimizes floor space occupation, and is widely suited for integration into fresh air systems in commercial, industrial, and large public buildings.
Our company’s Q‑type air heater is an industrial‑grade, forced‑convection heating unit that uses water or steam as the heat transfer medium. It is specifically designed for large‑space applications such as factory and mine workshops, warehouses, large buildings, and drying rooms. The equipment consists of a fan, an electric motor, and a steel finned‑tube radiator integrated into a single unit. Performance tests have demonstrated its stable and reliable operation. By combining “steam heat exchange with forced air supply,” it rapidly heats the air, delivering highly efficient heating and making it one of the mainstream solutions for heating high‑ceiling spaces.
Mobile phone:+86-188-6602-0062
Email:sddljnhb@163.com
Website:http://www.sddljnhb.com
Address: No. 5166, Tianqu East Road, Economic Development Zone, Dezhou City, Shandong Province
Mobile Access