Modular air conditioning unit

Category:

Inquiry

Product Details

Product Introduction:
A packaged air-conditioning unit is composed of various modular air-handling components that can be flexibly configured from different functional sections according to specific application scenarios and treatment requirements, enabling comprehensive, all‑round air conditioning to meet diverse environmental demands for temperature, cleanliness, and fresh‑air quality.

Method for indicating the specifications and models of packaged air conditioners:

Structural schematic diagram:

Product Performance Parameters Table:

Model/Item Project	Rated airflow m 3/h	wide * High mm	Recommended Length for Each Functional Segment mm
	Rated airflow m 3/h	wide * High mm	Mixing paragraph	Plate type Primary effect Filtering paragraph	Bag-type Medium efficacy Filtering paragraph	Comprehensive Filtering paragraph	Cooling coil Water stop paragraph	Steam Heating paragraph	Electric heating Hot section	Wet film Humidification paragraph	Dry sauna Gasoline addition Wet section	High pressure Mist Humidification paragraph	Electrode / Electric heating Humidification paragraph	Wind turbine paragraph	Silencing paragraph	Current sharing paragraph	middle paragraph
ZK3	3000	800*900	500	200	500	500	800	500	400	and Table Cold vessel group Combine An to pack; to load; to install No Single Lonely occupy Use Empty interval	600	700	600	900	600	600	500
ZK4	4000	950*900	500	200	500	500	800	500	400		600	700	600	900	600	600	500
ZK5	5000	1100*900	500	200	500	500	800	500	400		600	700	600	900	600	600	500
ZK6	6000	1100*1050	500	200	500	500	800	500	400		600	700	600	900	600	600	500
ZK8	8000	1200*1200	600	200	500	500	800	500	400		600	700	600	1200	600	600	500
ZK 10	10000	1200*1450	600	200	500	500	800	500	400		600	700	600	1200	800	700	600
ZK 12	12000	1400*1450	700	200	500	500	800	500	400		600	700	600	1200	800	700	600
ZK 15	15000	1500*1550	700	200	500	500	800	500	400		600	700	600	1800	800	700	600
ZK 20	20000	1700*1900	900	200	500	500	800	500	400		600	700	600	1800	800	700	600
ZK 25	25000	2000*1900	900	200	500	500	800	500	400		600	700	600	2000	900	700	600
ZK 30	30000	2000*2200	900	200	500	500	800	500	400		600	700	600	2000	900	700	600
ZK 35	35000	2300*2200	900	200	500	500	800	600	500		700	800	700	2000	900	700	600
ZK 40	40000	2500*2300	1100	200	500	500	800	600	500		700	800	700	2400	900	800	600
ZK 50	50000	2800*2550	1100	200	500	500	800	600	500		700	800	700	2800	1100	800	800
ZK 60	60000	3000*2750	1300	200	500	500	800	600	500		700	800	700	2800	1100	800	800
ZK 80	80000	3400*3100	1300	200	500	500	800	600	500		700	800	700	3000	1100	800	800
ZK 100	100000	3700*3450	1600	200	500	500	800	600	500		700	800	700	3300	1300	900	800
ZK 120	120000	4350*3450	1600	200	500	500	800	600	500		700	800	700	3300	1300	900	800
ZK 150	150000	5000*3850	1600	200	500	500	800	600	500		700	800	700	3300	1300	900	800

Keywords:

Quote Inquiry

Please fill in your Contact information and your requirements; we will arrange for a professional to contact you!

Name

Phone

The Products I need

Message content

How many products do you need?
What more information do you need to know?

Submit

Cross-flow air curtain machine

The cross‑flow air curtain employs a large‑diameter, slender cross‑flow impeller—also known as a tangential fan—directly driven by a single‑phase motor to generate a wide, planar, high‑velocity airflow. It is installed above or on the side of doorways. The unit features a flat, rectangular profile with a much reduced depth compared to centrifugal models, allowing it to seamlessly integrate into various ceiling designs. It is particularly well suited for spaces with limited headroom and where aesthetics and quiet operation are paramount, such as shopping malls, supermarkets, restaurants, office buildings, banks, hospitals, and residential garages.

Cooling coil

Our company’s surface-type coolers are among the core heat-exchange devices in air-conditioning and ventilation systems. They are primarily used to cool and dehumidify air, and can also be switched to hot-water or steam mode during winter to provide air heating. By utilizing a refrigerant (such as chilled water, refrigerant, or brine) or a heat-transfer medium (such as hot water or steam) flowing inside the tubes, these units facilitate forced‑convection heat exchange with the air flowing outside the tubes, thereby regulating air temperature and humidity. As the central heat-exchange components of chiller units, fresh-air handling units, fan coil units, and other equipment, they offer high heat-exchange efficiency, flexible installation, and broad compatibility.

Fresh air ventilator

The ceiling‑mounted fresh air ventilator (ceiling‑type air handling unit) is a central air‑conditioning terminal unit that integrates fresh air exchange, air temperature and humidity control, air filtration and purification, and energy recovery. The unit features a concealed ceiling‑mount installation, suspended within the building’s suspended ceiling. It utilizes chilled water or hot water piping to provide cooling and heating, while simultaneously exhausting indoor stale air and supplying filtered outdoor fresh air. This system not only enhances indoor air quality in enclosed spaces but also regulates air temperature through heat‑exchanger coils, offering both ventilation and central air‑conditioning functions. It delivers energy savings, minimizes floor space occupation, and is widely suited for integration into fresh air systems in commercial, industrial, and large public buildings.

Q-type steam heater

Our company’s Q‑type air heater is an industrial‑grade, forced‑convection heating unit that uses water or steam as the heat transfer medium. It is specifically designed for large‑space applications such as factory and mine workshops, warehouses, large buildings, and drying rooms. The equipment consists of a fan, an electric motor, and a steel finned‑tube radiator integrated into a single unit. Performance tests have demonstrated its stable and reliable operation. By combining “steam heat exchange with forced air supply,” it rapidly heats the air, delivering highly efficient heating and making it one of the mainstream solutions for heating high‑ceiling spaces.

Shandong Delin Energy Conservation and Environmental Protection Technology Co., Ltd.

+86-534-5012407

Mobile phone:+86-188-6602-0062
Email:sddljnhb@163.com
Website:http://www.sddljnhb.com

Address: No. 5166, Tianqu East Road, Economic Development Zone, Dezhou City, Shandong Province

Mobile Access

Business License