Product Details
Product Introduction:
The horizontal surface‑mounted fan coil unit is an air-conditioning terminal device that is installed directly exposed beneath the indoor ceiling, at the bottom of beams, or on high walls. The unit features an electrostatic powder‑coated metal housing with a clean, streamlined appearance, allowing it to seamlessly integrate into the interior décor without the need for an additional suspended ceiling. It is particularly well suited for retrofitting older buildings, hotel guest rooms, offices, apartments, and retail spaces—environments where ceilings are absent or unsuitable for吊顶 installation—and offers notable advantages such as quick installation, easy maintenance, and intuitive airflow management.
Main functions of the Products:
1. Cooling and Heating: Designed for year-round use, it can deliver efficient cooling and heating by connecting to the central air-conditioning system’s chilled and hot water loops, and when paired with a thermostat, it enables precise room‑temperature control within ±1°C.
2. Independent zone control: Each room can be equipped with an independent unit, enabling on-demand start-up and shutdown as well as three-speed fan control, thereby providing cooling and heating precisely when needed and effectively reducing the system’s operational energy consumption.
3. Indoor Air Circulation and Purification: It continuously drives indoor air circulation, while the coarse‑efficiency filter built into the return air grille effectively captures suspended particles such as dust and fibers, helping to maintain clean air.
4. Quiet Operation: Equipped with a low-noise centrifugal impeller and fully lined with thermal‑insulating, sound‑absorbing cotton on the inner casing, it ensures that operating noise remains unobtrusive even when installed in an exposed configuration. Optional ABS impellers or brushless DC motors further reduce noise levels.
5. Balancing aesthetics and practicality: Streamlined housing, finished in standard white or ivory powder coating; the panel is removable, serving as both an air diffuser and a service access panel, eliminating the need to provide a dedicated ceiling access hatch.
6. Easy maintenance: The return-air filter can be removed and cleaned directly from beneath the panel; opening the panel allows for maintenance of the motor, coil, and electrical components without the need to climb or dismantle the ceiling, significantly reducing maintenance complexity.
Product model specifications:
| Model number |
Air volume (m³/h) |
Cooling capacity (kW) |
Heating capacity (kW) |
Noise dB(A) |
Motor power (W) |
Water resistance (kPa) |
Inlet and outlet pipe diameter |
External dimensions (L×W×H) mm |
Net weight (kg) |
| FP-34WM |
340 |
1.80 |
3.00 |
≤36 |
32 |
15 |
DN20 |
850×550×270 |
25 |
| FP-51WM |
510 |
2.70 |
4.50 |
≤38 |
45 |
18 |
DN20 |
950×550×270 |
30 |
| FP-68WM |
680 |
3.60 |
6.00 |
≤40 |
55 |
22 |
DN20 |
1050×550×270 |
35 |
| FP-85WM |
850 |
4.50 |
7.50 |
≤42 |
72 |
26 |
DN20 |
1150×550×270 |
40 |
| FP-102WM |
1020 |
5.40 |
9.00 |
≤44 |
96 |
30 |
DN20 |
1250×550×270 |
45 |
| FP-136WM |
1360 |
7.20 |
12.0 |
≤46 |
134 |
35 |
DN25 |
1450×600×280 |
55 |
| FP-170WM |
1700 |
9.00 |
15.0 |
≤48 |
174 |
38 |
DN25 |
1650×600×280 |
65 |
| FP-204WM |
2040 |
10.8 |
18.0 |
≤50 |
210 |
42 |
DN25 |
1850×600×280 |
75 |
Keywords:
Quote Inquiry
Please fill in your Contact information and your requirements; we will arrange for a professional to contact you!
Cross-flow air curtain machine
The cross‑flow air curtain employs a large‑diameter, slender cross‑flow impeller—also known as a tangential fan—directly driven by a single‑phase motor to generate a wide, planar, high‑velocity airflow. It is installed above or on the side of doorways. The unit features a flat, rectangular profile with a much reduced depth compared to centrifugal models, allowing it to seamlessly integrate into various ceiling designs. It is particularly well suited for spaces with limited headroom and where aesthetics and quiet operation are paramount, such as shopping malls, supermarkets, restaurants, office buildings, banks, hospitals, and residential garages.
Our company’s surface-type coolers are among the core heat-exchange devices in air-conditioning and ventilation systems. They are primarily used to cool and dehumidify air, and can also be switched to hot-water or steam mode during winter to provide air heating. By utilizing a refrigerant (such as chilled water, refrigerant, or brine) or a heat-transfer medium (such as hot water or steam) flowing inside the tubes, these units facilitate forced‑convection heat exchange with the air flowing outside the tubes, thereby regulating air temperature and humidity. As the central heat-exchange components of chiller units, fresh-air handling units, fan coil units, and other equipment, they offer high heat-exchange efficiency, flexible installation, and broad compatibility.
The ceiling‑mounted fresh air ventilator (ceiling‑type air handling unit) is a central air‑conditioning terminal unit that integrates fresh air exchange, air temperature and humidity control, air filtration and purification, and energy recovery. The unit features a concealed ceiling‑mount installation, suspended within the building’s suspended ceiling. It utilizes chilled water or hot water piping to provide cooling and heating, while simultaneously exhausting indoor stale air and supplying filtered outdoor fresh air. This system not only enhances indoor air quality in enclosed spaces but also regulates air temperature through heat‑exchanger coils, offering both ventilation and central air‑conditioning functions. It delivers energy savings, minimizes floor space occupation, and is widely suited for integration into fresh air systems in commercial, industrial, and large public buildings.
Our company’s Q‑type air heater is an industrial‑grade, forced‑convection heating unit that uses water or steam as the heat transfer medium. It is specifically designed for large‑space applications such as factory and mine workshops, warehouses, large buildings, and drying rooms. The equipment consists of a fan, an electric motor, and a steel finned‑tube radiator integrated into a single unit. Performance tests have demonstrated its stable and reliable operation. By combining “steam heat exchange with forced air supply,” it rapidly heats the air, delivering highly efficient heating and making it one of the mainstream solutions for heating high‑ceiling spaces.
Mobile phone:+86-188-6602-0062
Email:sddljnhb@163.com
Website:http://www.sddljnhb.com
Address: No. 5166, Tianqu East Road, Economic Development Zone, Dezhou City, Shandong Province
Mobile Access